Aluminum Alloy Flat Stick Floor Scaffolding

Installation steps:
– Preparation: Prepare materials and tools such as aluminum alloy skirting, neutral silicone structural adhesive or glass glue, glue gun, tape measure, cutting tools. At the same time, make sure the wall and floor are flat, dry, clean and free of dust, oil and other impurities.
– Measurement and cutting: Use a tape measure to measure the length of the wall, cut the aluminum skirting according to the measurement results, and make sure the length of the skirting matches the length of the wall. Cutting should pay attention to the accuracy of the angle, especially in the corners of the wall at the corner of the yin and yang corners, the yin corner needs to be cut at an angle of 45 ° outward slant, and the yang corner needs to be cut at an angle of 45 ° inward slant, in order to ensure that the splicing of the beauty of the joints.
– Gluing: Along the skirting needs to be installed in the position, in the wall or the ground evenly on the glue. The thickness of the glue should be moderate, not too much or too little. If the glue is too much, the installation of the glue will overflow, affecting the appearance, and cleaning difficulties; if the glue is too little, it can not guarantee the firmness of the skirting.
– Installation of skirting: Gently press the skirting with good glue on the wall to make full contact with the glue to ensure that the skirting and the wall are closely adhered to. Pay attention to keep the skirting horizontal and vertical during the installation process, you can use a level ruler and other tools to check and adjust.
– Fixing and cleaning: After the installation is completed, fix the skirting with masking tape or other fixing tools to prevent the skirting from shifting before the glue dries. Wait for 24 hours to 48 hours, after the glue is completely dry, remove the masking tape and scrape off the overflowed glue with a craftsman’s knife.